 |
| Добавьте подпись |
John Deere D100, D110, D120, D130, D140, D150, D160 Manual
DESCRIPTION:
Repair Technical Manual For John Deere D100, D110, D120, D130, D140, D150, D160 Tractors.
Servicing/Operation Instructions for
John Deere D100 through D160 Tractor Series
Getting
the correct fix for a John Deere Tractor Series becomes a whole lot easier when
you’re hooked on to this read. This is the perfect set of instructions to
ensure your repair effort remains as effortless as possible.
John Deere D Series Manual
The
John Deere brand has been in the engineering equipment industry for several
years, and there’s much to know about each of its products. The D series of
tractors features a lot of exciting equipment.
In
this series, you’re assured maximum satisfaction when you’re in dire need of an
engine that has the best specs to perform your mowing and other activities with
less stress.
Models
- John Deere D100 Manual
- John Deere D110 Manual
- John Deere D120 Manual
- John Deere D130 Manual
-
John Deere D140 Manual
-
John Deere D150 Manual
- John Deere D160 Manual
·
Special Instructions for John Deere Tractor
To get your machine working at an
optimal level, regular servicing is a must. Without the right frequency of
servicing, your engine is more likely to develop faults and perform poorly. Follow
these to keep you safe during operation of a John Deere, and ensure maximum
performance:
Fuel
observation
As
is natural, regardless of the John Deere model you buy, you’d have to get
gasoline in the tank for it to work. If it happens that you’ve not made use of
the machine for more than a month, it becomes necessary to get the fuel in your
tank drained off. Also, the makers (John Deere) attest to the need for
utilizing gasoline with an at least 87 octane rating.
Battery
inspection
When
you don’t make use of batteries for a long time, it becomes expressly necessary
to undergo a check. If the battery isn’t properly handled, there’s a high risk
of its damage or resistance to ignition. The first step is to check for the
buildup of corrosive materials at the head of the battery terminals. If there’s
no corrosion, you’re good to go, but if there is, here’s what you need to do.
- Loosen the cables connected to the
battery
- If the terminal heads are heavily
corroded, clean it off with a wire brush ensuring there’s minimal to no
presence of corrosion seen on the battery heads.
-
After the heads are connected, ensure
the battery is powered to about 13V.
- Inspect the voltage of your battery
with a voltmeter, and get it charged to the exact rating as per manufacturer
specs.
Air
Filter Cleaning
Your air filter prevents debris and
dirt from getting to your engine. But while this filter functions, it could
pack dirt and grime over time. In your John Deere, the air filter is located
under the hood and houses a foam which acts as a receptacle of dust and dirt.
If you’ve been using your tractor for a
long time, there’s a high chance that your air filter needs cleaning. Clean out
the filter with water and detergent with a high oil removal power. When your air
filter is properly cleaned, set it out to dry before placing it back under your
tractor’s hood. When your air filter gets damaged beyond repair, use a
certified John Deere replacement air filter.
Operating the Engine
When
you’re through with servicing the engine, what’s next is starting it up. To rev
up the engine, press down the brake and get the power take-off for the
tractor’s blades switched off. It’s not possible to start the tractor without
sitting on the driver seat provided. When you’re on the seat, the seat switch
gets activated making it easier for you to manage operation.
Troubleshooting
Operating
a John Deere Tractor is easier than ever when you’ve got access to the right
set of information. Here are the steps you need to follow in a troubleshoot
effort:
When the engine refuses to start?
Check
that the engine is properly oiled, and also look for any leaks or spills of
fuel around where the tractor is parked. When a leak is detected, get the services
of a technician to rectify the problem.
Engine
start failure may also be as a result of a clogged fuel line. The line links
your tractor’s tank to the engine for fuel supply. If your line is long enough,
you can get the clogged part clipped off. You can also make use of a replacement
part from John Deere.
Another
reason why the engine’s refusing to start may arise from a soothed spark plug.
Here’s what to do when you need your spark plug cleaned up;
-
Your spark plug should be loosened with
a spark plug socket
-
Use a flat-end screwdriver to scrape
off the excess soot covering up the ends of the spark plug from connecting.
- Use a hard brush with some gasoline to
brush up the part of the plug that goes into the engine.
-
Tighten the spark plug with the socket
Note
that it is strongly advised to get your preferred motor oil brand changed when
you notice your spark plug getting clogged too often.
Why is too much smoke coming out of the
engine’s exhaust?
This
may be as a result of using substandard lubricants, or incomplete drainage of used
motor oil. Ensure you make use of recommended lubricants to keep your engine
functioning.
Level of expertise needed to properly
service your John Deere Tractor
This
is based on the type of servicing your engine needs. For example, all your
machine could need may be an oil change, spark plug clean, etc. which you could
easily handle.
But
when all you’ve tried isn’t bringing forth results, the next best step is to enlist
the services of a qualified technician.
SECTIONS COVERED:
- Safety
- Electrical
- Index
- Specifications and Information
- Miscellaneous
- Engine - Single Cylinder
- Engine - V - Twin
- Power Train - Hydrostatic
- Power Train - Gear
- Steering
- Attachments
- Brakes
FORMAT:
PDF File
OS:
All OS
